SYMPHONY E58 HW3 V13 SP7715GA FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

SYMPHONY E58 HW3 V13 SP7715GA FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7715 Loader NAND v1.1 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected NAND Flash , Structure detect Ok!

[FW_READER] : Step #1 Passed!

[FW_READER] : Step #2 Passed!

[FW_READER] : Initialize Ok ,  0x13 , NAND : b256k

[FW_READER] : Step #3 Passed!

Model Name  : E58

Model Brand : symphony

Model Device: E58

AndrVersion : 4.4.2

BaseBand CPU: SCX15_SP7715GA

Project Ver : E58_HW3_V13

Model Ext   : E58

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv_b256k.img

[Read Ok] : nvitem_w.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : sc7715_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : CP2._CP2_WCN_14C_W15.18_Release.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system_b256k.img

[Read Ok] : cache_b256k.img

[Read Ok] : recovery.img

[Read Ok] : userdata_b256k.img

AndroidInfo created

Firmware Size : 338 MiB

Saved to : C:\Users\polash\Desktop\SCX15_SP7715GA_[NAND_b256k]_E58_4.4.2_E58_HW3_V13_E58\

Done!

SYMPHONY E82 MT6570 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

SYMPHONY E82 MT6570 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                     E82_HW1_V8 MT6570-6.0=ok

                   polash_kar@ymail.com 01816493918

Waiting for device connection ...

PTFN : MediaTek USB Port (COM13)

MODE : BOOTROM

PORT : 13

Waiting BOOT ack ...

BROM : Skip ACK verify

BROM : Init BROM

BROM init passed!

     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000000

BROM : SecMode  : PLAIN [+PRL]

BROM : BOOTROM

AGENT : Look for suitable BootChain in DA ...

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6570

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ...

     DA : AGENT started!

DA : SYNC

     DA : MODE : BROM

DA : EXT_RAM NOT initialized!

     EMI : DEV : INFINITY

     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0

     EMI : CNT : 0003

     EMI : Init EMI from INTERNAL DB

     EMI : EXT_RAM CFG Passed!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]

        DRAM: 0x20000000 [ 512.00 MB ]

        NAND: 98DE88A37251080000000000

        NAND:

              TSIZE  : 0x217800000 [ 8.37 GB ]

              ASIZE  : 0x1F7400000 [ 7.86 GB ]

              PSIZE  : 0x00004000 [ 16.00 KB ]

              BSIZE  : 0x00600000 [ 6.00 MB ]

              SSIZE  : 0x000007A0

              STYPE  : 0x0013

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : D09385D7529050B2600F83DDA2B9C6DE

DA : USB : FULL-SPEED

Boot done!

Patch Level    : MRA58K

Display ID     : E82_HW1_V8

Ver. CodeName  : REL

Ver. Release   : 6.0

Sec. Patch     : 2017-06-05

Build Time     : 1497432313

Product Model  : E82

Product Brand  : Symphony

Product Name   : E82

Product Device : E82

Product Board  : E82

Product Manfct : Symphony

Board Platform : mt6570

Product Info   : fise6570_ctlc_m

MT6570__Symphony__E82__6.0__E82_HW1_V8__MRA58K__fise6570_ctlc_m

Read : preloader.bin

Read : nvram.bin

Read : lk.bin

Read : boot.img

Read : recovery.img

Read : secro.img

Read : logo.bin

Read : md1rom.img

Read : system.img

Read : userdata.img

Android Info saved : _Android_info.txt

Scatter  : MT6570_Android_scatter.txt

Saved to : C:\Users\polash\Desktop\MT6570__Symphony__E82__6.0__E82_HW1_V8__MRA58K__fise6570_ctlc_m\

Done!

Elapsed: 00:03:47

EUROSTAR Onyx-3S MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

EUROSTAR Onyx-3S MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                 polash_kar@ymail.com 01816493918

xGPT : Normalize settings Ok!

Brand     : ADVAN
ProdName  : full_rlk6737m_35g_c_m0
ProdModel : i5C
Device    : rlk6737m_35g_c_m0
AndroidVer: 6.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-m0.mp1-V2.84_rlk6737m.35g.c.m0_P8

[Read Ok] : preloader_rlk6737m_35g_c_m0.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Make Ok] : cache.img
[Make Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / rlk6737m_35g_c_m0 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1977 MiB
Scatter saved to : E:\Desktop\MT6737M__ADVAN__i5C__rlk6737m_35g_c_m0__6.0__alps-mp-m0.mp1-V2.84_rlk6737m.35g.c.m0_P8\

All done!

G-TiDE Vans-8 MT6580 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

G-TiDE Vans-8 MT6580 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 13 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x0005

BLVersion : 0x00FE

PreLoader : NOT Active [ Erased ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 700100563130303038501110479833A3

Initialize Memory ...

DRAM configured from IDB!

DRAM initialize passed!

DRAM size : 0x40000000

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x70 , OEM : 0100

[eMMC] : FLASH_INF : [KINGSTON] , 80001

[eMMC] : FLASH_CID : 700100563130303038501110479833A3

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001C3000000

[eMMC] : FLASH_UCP : 7216 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB1835915955D92DC77EF98C9C5F

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

USBDL : Init HSUSB Ok!

xGPT : Normalize settings Ok!

Brand     : G-TiDE Vans 8

ProdName  : G-TiDE Vans 8

ProdModel : G-TiDE Vans 8

Device    : G-TiDE Vans 8

AndroidVer: 5.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_ESKY6580.WE.L_P1

[Read Ok] : preloader_esky6580_we_l.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / esky6580_we_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1919 MiB

Scatter saved to : C:\Users\polash\Desktop\G-TiDE_Vans_8\MT6580__G-TiDE_Vans_8__G-TiDE_Vans_8__G-TiDE_Vans_8__5.1__ALPS.L1.MP6.V2_ESKY6580.WE.L_P1\

All done!

Done!

Elapsed: 00:12:17

Reconnect Power/Cable!

HUAWEI Y530-U00 MSM8610 FIRMWARE FLASH FILE ANDROID 4.3 100% TESTED BY Bijle Telecom

HUAWEI Y530-U00 MSM8610 FIRMWARE FLASH FILE ANDROID 4.3 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Device Found!

Initialize ...

Handshake passed!

BB_IDC_CPU : SnapDragon 2x/4x|00 [MSM8x10]

ID_BLOCK_S : 0164C329

ID_BLOCK_I : 008110E1

ID_BLOCK_L : BE463CDA75E1EE19C6BB55BA85DC5474

ID_BLOCK_L : 3F56F85344CF7FF409E4A9666C839DBE

Use CM2 Internal Loader

Loader Sent! Initializing ...

Running FireHose on BBID : MSM8x10 , FLASH : eMMC , mVER : 1

ExtInfo : 0x0000C000/0000C000/00001000/00001000

Boot Ok!

Brand : Huawei

ProdName : Y530-U00

ProdModel : HUAWEI Y530-U00

Device : hwY530-U00

AndroidVer: 4.3

Manufact. : HUAWEI

QLMxCPU : MSM8610

DevInfo : MSM8610__HUAWEI__Huawei__ANDR_v4.3__HUAWEI_Y530-U00__hwY530-U00__Y530-U00

Reading Flash Content ...

[Read Ok] : gpt_main0.bin

[Read Ok] : sbl1.mbn

[Read Ok] : deploy.mbn

[Read Ok] : rpm.mbn

[Read Ok] : tz.mbn

[Read Ok] : emmc_appsboot.mbn

[Read Ok] : oemdata.bin

[Read Ok] : NON-HLOS.bin

[Read Ok] : fs_gc.img

[Read Ok] : persist.img

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : cust.img

[Read Ok] : cache.img

[Read Ok] : misc.img

[Read Ok] : system.img

[Read Ok] : userdata.img

[Read Ok] : gpt_backup0.bin

Android Info saved!

Read finished!

Configuration : MSM8x10 / eMMC

Firmware Size : 1373 MiB

Done!

MSM8610__HUAWEI__Huawei__ANDR_v4.3__HUAWEI_Y530-U00__hwY530-U00__Y530-U00

itel it1409 SP7731C HW V1.1 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

itel it1409 SP7731C HW V1.1 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0    

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : itel_it1409

Model Brand : Itel

Model Device: itel_it1409

AndrVersion : 6.0

BaseBand CPU: SP7731CEB_IT1409

Project Ver : it1409-W406A-6.0-BD-V008-20170713

Model Ext   : itel it1409

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : sysinfo.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2330 MiB

Saved to : C:\Users\polash\Desktop\SP7731CEB_IT1409_itel_it1409_6.0_it1409-W406A-6.0-BD-V008-20170713_itel_it1409\

Done!

Elapsed: 00:12:09

Reconnect Power/Cable!

Lava iris 505 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

Lava iris 505 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

                   Lava iris 505_GP_S107_2017c23

                  polash_kar@ymail.com 01816493918

Reading Flash Content now ...

Brand      iris505

ProdName   iris505

ProdModel  iris505

Device     iris505

AndroidVer 4.4.2

MTKxCPU    MT6572

MTKxPRJ    ALPS.KK1.MP7.V1

[Read Ok]  preloader_lava72_sp49t.bin

[Read Ok]  MBR

[Read Ok]  EBR1

[Read Ok]  lk.bin

[Read Ok]  boot.img

[Read Ok]  recovery.img

[Read Ok]  secro.img

[Read Ok]  logo.bin

[Read Ok]  system.img

[Read Ok]  cache.img

[Read Ok]  userdata.img

[ScatCFG]  MT6572  V1.1.1  lava72_sp49t  EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size  805 MiB

Scatter saved to  CUsersGsM-BaBuDesktopreadingMT6572__iris505__iris505__iris505__4.4.2__ALPS.KK1.MP7.V1

LAVA Iris 870 MT6735 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

LAVA Iris 870 MT6735 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6737

BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00

BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9B

NAND Flash : NOT INSTALLED

eMMC Flash : 510001154D333238D21400427BB4D3EE

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM328

[eMMC] : FLASH_CID : 150100513832334D420014D2EED3C37B

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xBA11EB18AA2B36680A4291805EDC974A

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

[AP] : Initial info read Ok!

Brand     : Lava

ProdName  : iris 870

ProdModel : iris 870

Device    : iris870

AndroidVer: 5.1

MTKxCPU   : MT6735

MTKxPRJ   : ALPS.L1.MP3.V2.135_LAVA6735M.34G.L_P10

Done!

Elapsed: 00:00:20

Reconnect Power/Cable!

LENOVO K33A48 MSM8937 FIRMWARE FLASH FILE ANDROID 6.0.1 100% TESTED BY Bijle Telecom

LENOVO K33A48 MSM8937 FIRMWARE FLASH FILE ANDROID 6.0.1 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Device Found!

Initialize ...

Handshake passed!

ID_BLOCK_I : SnapDragon 430 [MSM8937]

ID_BLOCK_S : 5CD34EFC

ID_BLOCK_E : 00007A2A

ID_BLOCK_L : DC82837B7D09648DD091FB31BA0D4E77

ID_BLOCK_L : 773A38D7E4BBA029F054C90F8BC54BC5

Use CM2 Internal Loader

Loader Sent! Initializing ...

Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1

MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]

ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200

Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : QE13MB

Boot Ok!

Brand     : Lenovo

ProdName  : karate

ProdModel : Lenovo K33

Device    : K33

AndroidVer: 6.0.1

Manufact. : LENOVO

QLMxCPU   : MSM8937

QLMxPRJ   : K33_USR_S145_1610170946_Q00380_ROW

DevInfo : MSM8937__LENOVO__Lenovo__ANDR_v6.0.1__Lenovo_K33__K33__karate__K33_USR_S145_1610170946_Q00380_ROW

Reading Flash Content ...

[Read Ok] : gpt_main0.bin

[Read Ok] : NON-HLOS.bin

[Read Ok] : sec.dat

[Read Ok] : cmnlib.mbn

[Read Ok] : cmnlib64.mbn

[Read Ok] : keymaster.mbn

[Read Ok] : emmc_appsboot.mbn

[Read Ok] : sbl1.mbn

[Read Ok] : rpm.mbn

[Read Ok] : tz.mbn

[Read Ok] : devcfg.mbn

[Read Ok] : adspso.bin

[Read Ok] : ddr.bin

[Read Ok] : fs_gc.img

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : ap.mbn

[Read Ok] : msap.mbn

[Read Ok] : splash.img

[Read Ok] : misc.img

[Read Ok] : mdtp.img

[Read Ok] : persist.img

[Read Ok] : cache.img

[Read Ok] : system.img

[Read Ok] : preload.img

[Read Ok] : userdata.img

[Read Ok] : gpt_backup0.bin

Android Info saved!

Read finished!

Configuration : MSM8937 / eMMC

Firmware Size : 2658 MiB

Done!

Elapsed: 00:07:55

Reconnect Power/Cable!

LiteTel-LT4501 MT6570 HW1 V5 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

LiteTel-LT4501 MT6570 HW1 V5 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                 polash_kar@ymail.com 01816493918

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM3)

MODE : PRELOADER PORT

PORT : 3

Waiting BOOT ack ...

PRELOADER : ACK confirmed!

BROM : Init BROM

BROM init passed!

     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000

     TYPE : MODERN RAPHAEL

BROM : SecLevel : 0x00000000

BROM : SecMode  : PLAIN [+PRL]

BROM : PRELOADER PORT

AGENT : Look for suitable BootChain in DA ...

AGENT : MTK_AllInOne_DA.bin

AGENT : Found MT6570

AGENT : MTK_DOWNLOAD_AGENT

     BROM : Sending 1st DA ...

BROM : DA sent

BROM :Transfer control to DA ...

     DA : AGENT started!

DA : SYNC

     DA : MODE : PRELOADER

DA : EXT_RAM initialized!

DA : BOOT to 2nd DA ...

DA : 2ND stage confirmed!

DA : SYNC with DA passed!

DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]

        DRAM: 0x20000000 [ 512.00 MB ]

        EMMC: 7001004D3632373034013727E9F4547F

        EMMC: VEN : KINGSTON | OEM : 01 | DEV : M62704

        EMMC:

              BOOT1  : 0x00200000 [ 2.00 MB ]

              BOOT2  : 0x00200000 [ 2.00 MB ]

              RPMB   : 0x00080000 [ 512.00 KB ]

              USER   : 0xE2000000 [ 3.53 GB ]

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : C2C5E3BA6684D424E94A689E8E55479C

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K

Display ID     : LT4501_HW1_V5

Ver. CodeName  : REL

Ver. Release   : 6.0

Sec. Patch     : 2017-07-05

Build Time     : 1499235310

Product Model  : LT4501

Product Brand  : LiteTel

Product Name   : LT4501

Product Device : LT4501

Product Board  : LT4501

Product Manfct : LiteTel

Board Platform : mt6570

Product Info   : fise6570_cweg_m

MT6570__LiteTel__LT4501__6.0__LT4501_HW1_V5__MRA58K__fise6570_cweg_m

Read : preloader.bin

Read : proinfo.img

Read : nvram.bin

Read : lk.bin

Read : boot.img

Read : recovery.img

Read : logo.bin

Read : md1rom.img

Read : secro.img

Read : system.img

ExtSparse : Compression ratio : 19%

Read : cache.img

Read : userdata.img

Android Info saved : _Android_info.txt

Scatter  : MT6570_Android_scatter.txt

Saved to : C:\Users\polash\Desktop\MT6570__LiteTel__LT4501__6.0__LT4501_HW1_V5__MRA58K__fise6570_cweg_m\

Done!

Elapsed: 00:06:57

OPPO A33f MSM8916 FIRMWARE FLASH FILE ANDROID 5.1.1 100% TESTED BY Bijle Telecom

OPPO A33f MSM8916 FIRMWARE FLASH FILE ANDROID 5.1.1 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Device Found!

Initialize ...

Handshake passed!

ID_BLOCK_I : SnapDragon 410 [MSM8916]

ID_BLOCK_S : 20A9C84B

ID_BLOCK_L : 58A8C23C9B070C3FE85DB7986722B29A

ID_BLOCK_L : 6013BD0C01903A4B4EA9E2DB29C4D2F9

Use CM2 Internal Loader

Loader Sent! Initializing ...

Running FireHose on BBID : MSM8916 , FLASH : eMMC , mVER : 1

MemInfo : 0x0003 / 0x0200 / 0x00000003A3E00000 [ eMMC 16 GiB ]

ExtInfo : 0x00004000/00004000/00001000/00001000/00000200

Boot Ok!

Brand     : OPPO

ProdName  : A33f

ProdModel : A33f

Device    : A33f

AndroidVer: 5.1.1

SWVersion : A33fEX_11.A.29_INT_029_201705311650

Manufact. : OPPO

QLMxCPU   : MSM8916

DevInfo : MSM8916__OPPO__OPPO__ANDR_v5.1.1__A33f__A33f__A33f__A33fEX_11.A.29_INT_029_201705311650

Reading Flash Content ...

[Read Ok] : gpt_main0.bin

[Read Ok] : NON-HLOS.bin

[Read Ok] : sec.dat

[Read Ok] : sbl1.mbn

[Read Ok] : emmc_appsboot.mbn

[Read Ok] : rpm.mbn

[Read Ok] : tz.mbn

[Read Ok] : hyp.mbn

[Read Ok] : pnvbak.img

[Read Ok] : lsplash.img

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : persist.img

[Read Ok] : misc.img

[Read Ok] : driver.iso

[Read Ok] : reserve4.bin

[Read Ok] : userdata.img

[Read Ok] : gpt_backup0.bin

[Read Ok] : gpt_main2.bin

[Read Ok] : cdt.mbn

[Read Ok] : gpt_backup2.bin

Android Info saved!

Read finished!

Configuration : MSM8916 / eMMC

Firmware Size : 2613 MiB

Done!

Elapsed: 00:07:09

SM-J700H CLONE MT6582 FIRMWARE FLASH FILE ANDROID 5.0 100% TESTED BY Bijle Telecom

SM-J700H CLONE MT6582 FIRMWARE FLASH FILE ANDROID 5.0 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A483447316404050000AF49B297

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A483447316404050000AF49B297

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0xBA11EB18C35A14C94E1EA09826549704

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : samsung

ProdName  : Galaxy J7

ProdModel : SM-J700H

Device    : Galaxy J7

AndroidVer: 5.0

MTKxCPU   : MT6582

MTKxPRJ   : J8270_5.0_V1.4

[Read Ok] : preloader_8270.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / 8270 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1083 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6582__samsung__SM-J700H__Galaxy_J7__5.0__J8270_5.0_V1.4\

All done!

Done!

Elapsed: 00:06:24

Reconnect Power/Cable!

Tecno J8 MT6735 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

Tecno J8 MT6735 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

                 polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6735

BB_CPU_NME : [MediaTek] MT6735_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9B

NAND Flash : NOT INSTALLED

eMMC Flash : 484A019065324741A5020705051E790C

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , e2GA

[eMMC] : FLASH_CID : 90014A4841473265050702A50C796305

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003AB800000

[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]

DEV RID    : 0xBA11EB18DACE9AD2398CF697B350992D

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : TECNO

ProdName  : TECNO-J8

ProdModel : TECNO-J8

Device    : TECNO-J8

AndroidVer: 5.1

MTKxCPU   : MT6735

MTKxPRJ   : J8-H354C1-L-160721V14

[Read Ok] : preloader_rlk6735_65u_1_l1.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : tz1.img

[Read Ok] : tz2.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / rlk6735_65u_1_l1 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 3223 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6735__TECNO__TECNO-J8__TECNO-J8__5.1__J8-H354C1-L-160721V14\

All done!

Done!

Elapsed: 00:16:34

Reconnect Power/Cable!

TOUCHMATE TM-MID793 TAB MT6572 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

TOUCHMATE TM-MID793 TAB MT6572 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 8801034E436172642039861E2322730B

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x88 , OEM : 0103

[eMMC] : FLASH_INF : [FORESEE] , draC

[eMMC] : FLASH_CID : 8801034E436172642039861E2322730B

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000001CE100000

[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB18FDAF0DF059A819ED71FCD9C6

INT RAM    : 0x00020000

EXT RAM    : 0x20000000 [512 MiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : TOUCHMATE

ProdName  : TM-MID793

ProdModel : TM-MID793

Device    : TM-MID793

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1.44

[Read Ok] : preloader_along12c_tb_kk.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / along12c_tb_kk / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1262 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__TOUCHMATE__TM-MID793__TM-MID793__4.4.2__ALPS.KK1.MP7.V1.44\

All done!

Done!

Elapsed: 00:05:31

Reconnect Power/Cable!

Vodafone-VF-696 MT6580 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

Vodafone-VF-696 MT6580 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 13 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x0005

BLVersion : 0x00FE

PreLoader : NOT Active [ Erased ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 150100513732534D420076D7CC5FA343

Initialize Memory ...

DRAM configured from IDB!

DRAM initialize passed!

DRAM size : 0x40000000

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BMS27

[eMMC] : FLASH_CID : 150100513732534D420076D7CC5FA343

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000

[eMMC] : FLASH_LEN : 0x00000001D2000000

[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB187502E9DC1B2FA5E7F855D77A

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

USBDL : Init HSUSB Ok!

xGPT : Normalize settings Ok!

Brand     : Vodafone

ProdName  : VF-696

ProdModel : VF-696

Device    : smart_grand

AndroidVer: 5.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2_JHZ6580.WE.VF.L_P49

[Read Ok] : preloader_pixi3_50_3g_vf.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / pixi3_50_3g_vf / EMMC

Android Info saved

HWConfig Info saved

FW Size : 1956 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6580__Vodafone__VF-696__smart_grand__5.1__ALPS.L1.MP6.V2_JHZ6580.WE.VF.L_P49\

All done!

Done!

Elapsed: 00:08:07

Reconnect Power/Cable!