Xiaomi Redmi 3S MSM8937 FIRMWARE FLASH FILE ANDROID 6.0.1 100% TESTED BY Bijle Telecom

Xiaomi Redmi 3S MSM8937 FIRMWARE FLASH FILE ANDROID 6.0.1 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

Wait for phone...

Device Found!

Initialize ...

Handshake passed!

BB_IDC_CPU : SnapDragon 430 [MSM8937]

ID_BLOCK_S : 00B769AD

ID_BLOCK_I : 0004F0E1

ID_BLOCK_L : A1EE7D59E3E2D689085CEC5BCFBF5F70

ID_BLOCK_L : 817FF5AC634A5C924DDCF5F08FFF2B9E

Use CM2 Internal Loader

Loader Sent! Initializing ...

Running FireHose on BBID : MSM8937 , FLASH : eMMC , mVER : 1

MemInfo : 0x0003 / 0x0200 / 0x0000000747C00000 [ eMMC 32 GiB ]

ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200

Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RX1BMB

Boot Ok!

Brand     : Xiaomi

ProdName  : land

ProdModel : Redmi 3S

Device    : land

AndroidVer: 6.0.1

Manufact. : Xiaomi

QLMxCPU   : MSM8937

DevInfo : MSM8937__Xiaomi__Xiaomi__ANDR_v6.0.1__Redmi_3S__land__land

Reading Flash Content ...

[Read Ok] : gpt_main0.bin

[Read Ok] : NON-HLOS.bin

[Read Ok] : sbl1.mbn

[Read Ok] : rpm.mbn

[Read Ok] : tz.mbn

[Read Ok] : devcfg.mbn

[Read Ok] : adspso.bin

[Read Ok] : ddr.bin

[Read Ok] : fs_gc.img

[Read Ok] : sec.dat

[Read Ok] : splash.img

[Read Ok] : emmc_appsboot.mbn

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : persist.img

[Read Ok] : misc.img

[Read Ok] : lksecapp.mbn

[Read Ok] : cmnlib.mbn

[Read Ok] : cmnlib64.mbn

[Read Ok] : keymaster.mbn

[Read Ok] : cust.img

[Read Ok] : userdata.img

[Read Ok] : gpt_backup0.bin

Android Info saved!

Read finished!

Configuration : MSM8937 / eMMC

Firmware Size : 3669 MiB

Done!

Elapsed: 00:05:31

WIKO BLOOM MT6582 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

WIKO BLOOM MT6582 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

                    polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A4834473164040501A1649C7147

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A4834473164040501A1649C7147

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0xBA11EB1832AD5F03E5BB505C2679FD57

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : WIKO

ProdName  : wiko

ProdModel : BLOOM

Device    : wiko

AndroidVer: 4.4.2

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_wiko.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / wiko / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 957 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6582__WIKO__BLOOM__wiko__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Done!

Elapsed: 00:04:50

Reconnect Power/Cable!

WE A3 SP7731C FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

WE A3 SP7731C FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0    

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : sp7731c_1h10_32v4_df_df019_c_we_a3_gps

Model Brand : SPRD

Model Device: sp7731c_1h10_32v4_df_df019_c_we_a3_gps

AndrVersion : 6.0

BaseBand CPU: SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS

Project Ver : MRA58K release-keys

Model Ext   : WE A3

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : logo3.bin

[Read Ok] : logo4.bin

[Read Ok] : logo5.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : sysinfo.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1580 MiB

Saved to : C:\Users\polash\Desktop\SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_WE_A3\

Done!

Elapsed: 00:08:18

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_WE_A3

Step  #1 : Identify

MEMORY : eMMC

LAYOUT : eMMC NORMAL

Step  #2 : Select logic

Select Logic : SC7731

Step  #3 : Processing data

Build PAC

[ADD FILE] : nvitem_w.bin

[ADD FILE] : nvitem_wcn.bin

[ADD FILE] : prodnv.img

[ADD FILE] : u-boot-spl-16k.bin

[ADD FILE] : sc7731C_CP0_modem.bin

[ADD FILE] : DSP_DM_Gx.bin

[ADD FILE] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin

[ADD FILE] : logo_480x854.bin

[ADD FILE] : fblogo_480x854.bin

[ADD FILE] : boot.img

[ADD FILE] : system.img

[ADD FILE] : cache.img

[ADD FILE] : recovery.img

[ADD FILE] : sysinfo.img

[ADD FILE] : userdata.img

[ADD FILE] : u-boot.bin

Build Ok! Result : 0x0018

Sign PAC ...

Sign Ok! FW compiled!

Elapsed: 00:02:33

Saved to : SP7731C_1H10_32V4_DF_DF019_C_WE_A3_GPS_sp7731c_1h10_32v4_df_df019_c_we_a3_gps_6.0_MRA58K_release-keys_WE_A3.pac

Done!

Symphony i10 plus MT6580 FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom

Symphony i10 plus MT6580 FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom

                                i10 plus HW1_V6

                 polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x01000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : SIGNED with SPRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464536324D4203594AD0674489

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM26E

[eMMC] : FLASH_CID : 150100464536324D4203594AD0674489

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xBA11EB1872FDE648B095C46179AB3118

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony

ProdName  : i10_plus

ProdModel : i10 plus

Device    : i10_plus

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : alps-mp-n0.mp2-V1_tinno6580.we.n_P136

[Read Ok] : preloader_v3730.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / v3730 / EMMC

Android Info saved

HWConfig Info saved

FW Size : 3232 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6580__Symphony__i10_plus__i10_plus__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P136\

All done!

Done!

Elapsed: 00:12:49

Reconnect Power/Cable!

SM-G950F GALAXY S8 CLONE MT6580 FIRMWARE FLASH FILE ANDROID 5.0.2 100% TESTED BY Bijle Telecom

GALAXY S8 CLONE MT6580 FIRMWARE FLASH FILE ANDROID 5.0.2 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x9C

NAND Flash : NOT INSTALLED

eMMC Flash : 90014A483447316404050BA169A07157

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x90 , OEM : 014A

[eMMC] : FLASH_INF : [HYNIX] , d1G4

[eMMC] : FLASH_CID : 90014A483447316404050BA169A07157

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000000E9000000

[eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]

DEV RID    : 0xBA11EB1858F25DFCBD40BCA10F72A60D

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : alps

ProdName  : full_boway6580_weg_gm_l

ProdModel : boway6580_weg_gm_l

Device    : boway6580_weg_gm_l

AndroidVer: 5.1

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8

[Read Ok] : preloader_boway6580_weg_gm_l.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / boway6580_weg_gm_l / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1417 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6580__alps__boway6580_weg_gm_l__boway6580_weg_gm_l__5.1__ALPS.L1.MP6.V2.19_BOWAY6580.WEG.GM.L_P8\

All done!

Done!

Elapsed: 00:07:06

Reconnect Power/Cable!

NEWMAX 768 TAB MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

NEWMAX 768 TAB MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                       KT07C_MB_V1.1= 15_02_02

                polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 8801034E43617264204129A29A56A20B

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x88 , OEM : 0103

[eMMC] : FLASH_INF : [FORESEE] , draC

[eMMC] : FLASH_CID : 8801034E43617264204129A29A56A20B

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000001CE100000

[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB188B49275C8A65A91167406D69

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : JTY

ProdName  : 768

ProdModel :  768

Device    : 768

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : W706-V31HWM4GN4GEN-WG07.WSVGA.2M.MID3118

[Read Ok] : preloader_kt07b_bly_mid8813.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / kt07b_bly_mid8813 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 929 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__JTY___768__768__4.4.2__W706-V31HWM4GN4GEN-WG07.WSVGA.2M.MID3118\

All done!

Done!

Elapsed: 00:04:46

Reconnect Power/Cable!

MEDIACOM SmartPadS2 MT6582 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

MEDIACOM SmartPadS2 MT6582 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6582

BB_CPU_NME : [MediaTek] MT6582_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x87

NAND Flash : NOT INSTALLED

eMMC Flash : 8801034E43617264202377FE9956129F

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x88 , OEM : 0103

[eMMC] : FLASH_INF : [FORESEE] , draC

[eMMC] : FLASH_CID : 8801034E43617264202377FE9956129F

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000001CE100000

[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB1878F9E559A3B8219909C28836

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : MTK/8382

ProdName  : SmartPadS2

ProdModel : M-MP1S2B3G

Device    : SmartPadS2

AndroidVer: 4.4.2

MTKxCPU   : MT6582

MTKxPRJ   : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_mr900.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6582 / V1.1.1 / mr900 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1303 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6582__MTK8382__M-MP1S2B3G__SmartPadS2__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Done!

Elapsed: 00:14:01

Reconnect Power/Cable!

MAJESTIC TAB 494 3G MT6572 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

MAJESTIC TAB 494 3G MT6572 FIRMWARE FLASH FILE ANDROID 4.4.2 100% TESTED BY Bijle Telecom

                      ELNK-C9000_V1=2014-11-14

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 8801034E43617264202300B811571235

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x88 , OEM : 0103

[eMMC] : FLASH_INF : [FORESEE] , draC

[eMMC] : FLASH_CID : 8801034E43617264202300B811571235

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00020000

[eMMC] : FLASH_LEN : 0x00000001CE100000

[eMMC] : FLASH_UCP : 7393 MiB [eMMC 8 GiB]

DEV RID    : 0xBA11EB187900BFAC7E11B6793BE9AB53

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : alps

ProdName  : MID

ProdModel : TAB 494 3G

Device    : c900

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1.44

[Read Ok] : preloader_c900.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / c900 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1009 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__alps__TAB_494_3G__c900__4.4.2__ALPS.KK1.MP7.V1.44\

All done!

Done!

Elapsed: 00:07:56

Reconnect Power/Cable!

IKON 3G TABLET IK-A7001 MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

IKON 3G TABLET IK-A7001 MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                                    MAINBOARD-ID N932-MB-V3.2

                     polash_kar@ymail.com 01816493918

Wait for phone...

Phone found! [ 3 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6572

BB_CPU_NME : [MediaTek] MT6572_S00

BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x88

NAND Flash : NOT INSTALLED

eMMC Flash : 45010053454D3034472853AAC8A91109

Initialize Memory ...

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x45 , OEM : 0100

[eMMC] : FLASH_INF : [SANDISK] , G40ME

[eMMC] : FLASH_CID : 45010053454D3034472853AAC8A91109

[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00200000

[eMMC] : FLASH_LEN : 0x00000000EC000000

[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]

DEV RID    : 0xBA11EB184F4B751C7E8DD9D04833BCCF

INT RAM    : 0x00020000

EXT RAM    : 0x40000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ...

Brand     : alps

ProdName  : tongjun72_et_jb3

ProdModel : IK-A7001

Device    : tongjun72_et_jb3

AndroidVer: 4.2.2

CU_SWVer  : n932_kesu_w_ml_v8_72_v17_204

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.JB3.MP.V1.17

[Read Ok] : preloader_tongjun72_et_jb3.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / tongjun72_et_jb3 / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 682 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__alps__IK-A7001__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17\

All done!

Done!

Elapsed: 00:04:12

Reconnect Power/Cable!

HUAWEI S7-701U RK30XXB CPU TAB FIRMWARE FLASH FILE ANDROID 4.1.2 100% TESTED BY Bijle Telecom

HUAWEI S7-701U TAB FIRMWARE FLASH FILE ANDROID 4.1.2 100% TESTED BY Bijle Telecom

polash_kar@ymail.com01816493918

Wait for device ...

Device Connected!

Interface test : Passed

Device mode : Protected! [ LOADER PROTECTED ]

Machine : RK3066

Device  : RK30SDK

ExtInfo : 4.0.4

SoC CPU : 300B

SoC PDT : 2012

SoC SWN : 1001

SoC REV : V100

Flash CSx  : 0x00

Flash Type : EMMC

Flash Vend : SAMSUNG

Flash Size : 0x00000001D2000000 ( 7.28 GiB )

Flash Info : 524288/2048/40/0/1

Connect Ok!

Wiping UserData ...

Wipe DATA Ok!

Done!

Elapsed: 00:00:14

Operation : Read Firmware [ v2.01 ]

----- > Phone/Tablet :

1. Power Off device

2. PRESS and HOLD BOTH VOLUME KEYS!

3. Insert USB cable! Press 'POWER_ON' button for a few second!

----- > IoT/Box :

1. Reset device power

2. PRESS and HOLD 'RESET' KEY!

3. Insert OTG/USB cable! Press 'POWER_ON' button for a few second!

Wait for device ...

Device Connected!

Interface test : Passed

Device mode : Protected! [ LOADER PROTECTED ]

Machine : RK3066

Device  : RK30SDK

ExtInfo : 4.0.4

SoC CPU : 300B

SoC PDT : 2012

SoC SWN : 1001

SoC REV : V100

Flash CSx  : 0x00

Flash Type : EMMC

Flash Vend : SAMSUNG

Flash Size : 0x00000001D2000000 ( 7.28 GiB )

Flash Info : 524288/2048/40/0/1

Connect Ok!

Brand     : Huawei

ProdName  : MediaPad

ProdModel : =U9510

Device    : hws7701u

AndroidVer: 4.1.2

Manufact. : HUAWEI

SysPatch  : HuaweiMediaPad

RKTxCPU   : RK30XXB

DevInfo : RK30XXB__HUAWEI__Huawei__ANDR_v4.1.2__=U9510__hws7701u__MediaPad

Reading Flash Content ...

[Read Ok] : param.cfg

[Read Ok] : misc.img

[Read Ok] : kernel.img

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : vrcb.bin

[Read Ok] : nvme.bin

[Read Ok] : modemnv.bin

[Read Ok] : modemnv2.bin

[Read Ok] : modemimage.bin

[Read Ok] : system.img

[Read Ok] : cust.bin

[Read Ok] : reserve2.bin

[Read Ok] : data.bin

Android Info saved!

Read finished!

Configuration : RK3066 / EMMC

Firmware Size : 7037 MiB

Done!

Elapsed: 00:13:06