SAMSUNG SM-J100H CLONE MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

SAMSUNG SM-J100H CLONE MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

polash_kar@ymail.com 01816493918

Reading Flash Content now ...

Brand     : samsung

ProdName  : Galaxy J1

ProdModel : SM-J100H

Device    : j13g

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_keytak72_cwet_lca.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / keytak72_cwet_lca / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 927 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__samsung__SM-J100H__j13g__4.4.2__ALPS.KK1.MP7.V1\

All done!

Done!

Elapsed: 00:04:52

Reconnect Power/Cable!

T-Touch Tab MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

T-Touch Tab MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

                             Board id-k0906M_V1.1

Reading Flash Content now ...

USBDL : Init HSUSB Ok!

Brand     : K0906M

ProdName  : wsvga

ProdModel : P909-3G

Device    : wsvga

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1

[Read Ok] : preloader_ty702_jty_hspa.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / ty702_jty_hspa / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 1379 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__K0906M__P909-3G__wsvga__4.4.2__ALPS.KK1.MP7.V1\

All done!

Wintouch TAB M713 MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

Wintouch TAB M713 MT6572 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

                       Board id-m706-mb-v4.0

Reading Flash Content now ...

Brand     : alps

ProdName  : v706

ProdModel : M713

Device    : v706

AndroidVer: 4.4.2

MTKxCPU   : MT6572

MTKxPRJ   : ALPS.KK1.MP7.V1.22

[Read Ok] : preloader_v706.bin

[Read Ok] : MBR

[Read Ok] : EBR1

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : secro.img

[Read Ok] : logo.bin

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / v706 / EMMC

Android Info saved

HWConfig Info saved

FW Size : 720 MiB

Scatter saved to : C:\Users\polash\Desktop\MT6572__alps__M713__v706__4.4.2__ALPS.KK1.MP7.V1.22\

All done!

Done!

Elapsed: 00:05:28

Reconnect Power/Cable!

CALLTOUCH TAB C333 SC7735 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

CALLTOUCH TAB C333 SC7735 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                   polash_kar@ymail.com 01816493918

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP5735C2EA_scx35_sp5735c2ea_4.4.2_s7190a_user_20170509_C333

Step  #1 : Identify

MEMORY : eMMC

LAYOUT : eMMC NORMAL

Step  #2 : Select logic

Select Logic : SC5735

Step  #3 : Processing data

Build PAC

[ADD FILE] : nvitem_w.bin

[ADD FILE] : nvitem_wcn.bin

[ADD FILE] : prodnv.img

[ADD FILE] : u-boot-spl-16k.bin

[ADD FILE] : sc8830_CP0_modem.bin

[ADD FILE] : DSP_DM_Gx.bin

[ADD FILE] : sc8830_modem_CP2_WCN_14C_W15.23_Release.bin

[ADD FILE] : logo_800x1280.bin

[ADD FILE] : fblogo_800x1280.bin

[ADD FILE] : boot.img

[ADD FILE] : system.img

[ADD FILE] : cache.img

[ADD FILE] : recovery.img

[ADD FILE] : userdata.img

[ADD FILE] : u-boot.bin

Build Ok! Result : 0x0017

Sign PAC ...

Sign Ok! FW compiled!

Elapsed: 00:01:29

Saved to : SP5735C2EA_scx35_sp5735c2ea_4.4.2_s7190a_user_20170509_C333.pac

Done!

CONTIGO ES41 SC7731 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

CONTIGO ES41 SC7731 FIRMWARE FLASH FILE ANDROID 4.2.2 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SPRD 773x eMMC loader v3 Infinity

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc7731g_modem_CP2_WCN_14E_W15.11_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 714 MiB

Saved to : C:\Users\polash\Desktop\New folder (3)\SC77xx_ANDROID_\

Done!

Elapsed: 00:06:16

Reconnect Power/Cable!

SYMPHONY E80 SC7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

SYMPHONY E80 SC7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

                                    E80_HW1_V9

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0    

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : sp7731c_fs285_32v4_project

Model Brand : Symphony

Model Device: E80

AndrVersion : 6.0

BaseBand CPU: SP7731CEB_FS285

Project Ver : roar_E80_HW1_V9

Model Ext   : roar E80

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.32.2_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x854.bin

[Read Ok] : fblogo_480x854.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Read Ok] : fbootlogo3.bin

[Read Ok] : fbootlogo4.bin

[Read Ok] : fbootlogo5.bin

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 1879 MiB

Saved to : C:\Users\polash\Desktop\New folder (3)\SP7731CEB_FS285_E80_6.0_roar_E80_HW1_V9_roar_E80\

Done!

Elapsed: 00:13:37

Reconnect Power/Cable!

HOTWAV iP7 SC7731 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

HOTWAV iP7 SC7731 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

                 polash_kar@ymail.com 01816493918

HOTWAV IP7S PlUS SC7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

HOTWAV IP7S PlUS SC7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

                  polash_kar@ymail.com 01816493918

====  Wait for phone...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x Android 5.x eMMC v1.0 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

FlashMode Set : Ok!

Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x Android 5.x eMMC v1.0 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

- > Wait phone connected ...

Phone found! [ 9 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC773x Android 5.x eMMC v1.0 Inf

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : sp7731g_1h10_hd_native

Model Brand : HOTWAV

Model Device: sp7731g_1h10

AndrVersion : 6.0

BaseBand CPU: SP7731GEA_HDR

Project Ver : K19_HOTWAV_IP7s_Plus_V20_220_20170616

Model Ext   : IP7s Plus

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731g_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_720x1280.bin

[Read Ok] : fblogo_720x1280.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2080 MiB

Saved to : C:\Users\polash\Desktop\New folder (8)\SP7731GEA_HDR_sp7731g_1h10_6.0_K19_HOTWAV_IP7s_Plus_V20_220_20170616_IP7s_Plus\

Done!

Elapsed: 00:15:06

Reconnect Power/Cable!

Operation : Convert InfinitySC to SPRD PAC [ v1.27 ]

Target : SP7731GEA_HDR_sp7731g_1h10_6.0_K19_HOTWAV_IP7s_Plus_V20_220_20170616_IP7s_Plus

Step  #1 : Identify

MEMORY : eMMC

LAYOUT : eMMC NORMAL

Step  #2 : Select logic

Select Logic : SC7731

Step  #3 : Processing data

Build PAC

[ADD FILE] : nvitem_w.bin

[ADD FILE] : nvitem_wcn.bin

[ADD FILE] : prodnv.img

[ADD FILE] : u-boot-spl-16k.bin

[ADD FILE] : sc7731g_CP0_modem.bin

[ADD FILE] : DSP_DM_Gx.bin

[ADD FILE] : sc8830g_modem_CP2_WCN_14D_W16.29.3_Release.bin

[ADD FILE] : logo_720x1280.bin

[ADD FILE] : fblogo_720x1280.bin

[ADD FILE] : boot.img

[ADD FILE] : system.img

[ADD FILE] : sysinfo.img

[ADD FILE] : cache.img

[ADD FILE] : recovery.img

[ADD FILE] : userdata.img

[ADD FILE] : u-boot.bin

Build Ok! Result : 0x0018

Sign PAC ...

Sign Ok! FW compiled!

Elapsed: 00:02:30

Saved to : SP7731GEA_HDR_sp7731g_1h10_6.0_K19_HOTWAV_IP7s_Plus_V20_220_20170616_IP7s_Plus.pac

Done!