google logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logogoogle logo

Thursday, 27 September 2018

Mango Premio SC7731C FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

Mango Premio SC7731C FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1u5UXvXZ8vM6wjPPVqxNYvEGaYO0x5pGi

- > Wait phone connected ...

Phone found! [ 13 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : tc4_w401
Model Brand : Mango
Model Device: tc4_w401
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : Mango_Premio_V05_20160920
Model Ext   : Mango Premio

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1486 MiB
Saved to : C:\Users\polash\Desktop\SP7731CEB_tc4_w401_6.0_Mango_Premio_V05_20160920_Mango_Premio\
Done!

Elapsed: 00:07:15

Reconnect Power/Cable!



Micromax Q350R MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

Micromax Q350R MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1Nk5hoONGCLcM8wPisSUDMwiwnEudVoET

Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 45010044533130303801296F522843C7
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x45 , OEM : 0100
[eMMC] : FLASH_INF : [SANDISK] , 8001S
[eMMC] : FLASH_CID : 45010044533130303801296F522843C7
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBA11EB1816ED2735F0C8E2391D7EB2EE
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Micromax
ProdName  : Q350R
ProdModel : Micromax Q350R
Device    : Q350R
AndroidVer: 6.0
MTKxCPU   : MT6580
MTKxPRJ   : alps-mp-m0.mp1-V2.34_rlk6580.we.c.m_P15

[Read Ok] : preloader_rlk6580_we_c_m.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rlk6580_we_c_m / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2028 MiB
Scatter saved to : C:\Users\polash\Desktop\MT6580__Micromax__Micromax_Q350R__Q350R__6.0__alps-mp-m0.mp1-V2.34_rlk6580.we.c.m_P15\

All done!


OPPO F7 CPH1819 MT6771 FIRMWARE FLASH FILE ANDROID 8.1.0 100% TESTED BY Bijle Telecom

OPPO F7 CPH1819 MT6771 FIRMWARE FLASH FILE ANDROID 8.1.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1GleZROEHDcfdVO0-PPCyGDvYBBepb0UK


Waiting for device connection ...

PTFN : MediaTek USB Port (COM9)
MODE : BOOTROM
PORT : 9
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
     CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode  : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F7 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_BR_HIGH.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : BROM
DA : EXT_RAM NOT initialized!
     EMI : DEV : INFINITY
     EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
     EMI : CNT : 000E
     EMI : Init EMI from INTERNAL DB
     EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00040000 [ 256.00 KB ]
        DRAM: 0xC0000000 [ 3.00 GB ]

        EMMC: 150100444836444D42050C096A18B4FB
        EMMC: VEN : SAMSUNG | OEM : 01 | DEV : DH6DMB
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0xE8F800000 [ 58.24 GB ]

        CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : AA9C147A2BB6CF0CAC1E7908C95E91C1

DA : USB : HIGH-SPEED

Philips S318 MT6737M FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom

Philips S318 MT6737M FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1jTDLILHztaQrzy6Hf-ji70kIx9sRiJvZ

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738C7460705B37AEA49
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A4838473165050746C749EA54B3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBA11EB183612B35BE6A0E6BE95D8EF7E
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Philips
ProdName  : S318
ProdModel : Philips S318
Device    : S318
AndroidVer: 7.0
MTKxCPU   : MT6737M
MTKxPRJ   : alps-mp-n0.mp1-V1.0.2_tpv6737m.35g.n_P26

[Read Ok] : preloader_tpv6737m_35g_n.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6737M / V1.1.2 / tpv6737m_35g_n / EMMC
Android Info saved
HWConfig Info saved
FW Size : 1652 MiB
Scatter saved to : C:\Users\polash\Desktop\MT6737M__Philips__Philips_S318__S318__7.0__alps-mp-n0.mp1-V1.0.2_tpv6737m.35g.n_P26\

All done!

Done!
Elapsed: 00:04:00
Reconnect Power/Cable!


Symphony V44 HW1 V8 MT6580 FIRMWARE FLASH FILE ANDROID 8.1 100% TESTED BY Bijle Telecom

Symphony V44 HW1 V8 MT6580 FIRMWARE FLASH FILE ANDROID 8.1 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1L5i6BBIyShSUBQc7ovArmqbJFA0lrX9s


V47 HW02 MT6580 FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom

V47 HW02 MT6580 FIRMWARE FLASH FILE ANDROID 7.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1cHWg7ItLhr65U1-hxj2jN_NZqvcsBWji


Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 150100464E58324D42013906DEE244F1
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM2XN
[eMMC] : FLASH_CID : 150100464E58324D42013906DEE244F1
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0xAB759669111879E8466C89A2ADF21D6D
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Symphony
ProdName : V47
ProdModel : V47
Device : V47
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_len6580.we.n_P28

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!

SYMPHONY V90 HW2 V8 MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

SYMPHONY V90 HW2 V8 MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1tKAfjs7mep2BKdP7H9crFjsdrR3a9lj7



WALTON R5 MT6739 FIRMWARE FLASH FILE ANDROID 8.1.0 100% TESTED BY Bijle Telecom

WALTON R5 MT6739 FIRMWARE FLASH FILE ANDROID 8.1.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1ehFmwBDc_kmrhh5x0W3XPy13IPys2A49


Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1812 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x80000000 [ 2.00 GB ]

        EMMC: 90014A484147346132A50EDAE40215E3
        EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG4a2
        EMMC:
              BOOT1  : 0x00400000 [ 4.00 MB ]
              BOOT2  : 0x00400000 [ 4.00 MB ]
              RPMB   : 0x00400000 [ 4.00 MB ]
              USER   : 0x3AB400000 [ 14.68 GB ]

        CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 3CE1F6EF18EC761A33CA193218792BFC

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : O11019
Display ID     : O11019 release-keys
Ver. CodeName  : REL
Ver. Release   : 8.1.0
Sec. Patch     : 2018-05-05
Build Time     : 1526047485
Product Brand  : TINNO
Product Device : Primo_R5
Product Info   : p130
Product Model  : P130AN
Product Brand  : TINNO
Product Name   : P130AN
Product Device : Primo_R5
Product Manfct : TINNO
Board Platform : mt6739

MT6739__TINNO__P130AN__8.1.0__O11019__p130

Read : preloader.bin
Read : recovery.img
Read : proinfo.img
Read : md1rom.img
Read : md1dsp.img
Read : spmfw.img
Read : mcupmfw.img
Read : nvram.bin
Read : lk.bin
Read : loader_ext.img
Read : boot.img
Read : logo.bin
Read : odmdtbo.img
Read : misc.img
Read : tz.img
Read : vendor.img
ExtSparse : Compression ratio : 66%
Read : system.img
ExtSparse : Compression ratio : 28%
Read : cache.img
Read : userdata.img

FW Size  : 2.34 GB
Android Info saved : _Android_info.txt
Scatter  : MT6739_Android_scatter.txt
Saved to : C:\Users\polash\Desktop\MT6739__TINNO__P130AN__8.1.0__O11019__p130\

Done!
Elapsed: 00:04:59


ZVII HW1 V15 MT6735 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

ZVII HW1 V15 MT6735 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
  polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1V83rDvVdm_MkV8BQlkLuquQhj_q6xI0W



Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9B
NAND Flash : NOT INSTALLED
eMMC Flash : 484A01906532474163350705BB924A8E
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A4841473265050735638E4A43BB
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID    : 0xBA11EB181515754BDD63AECC8C14ED16
INT RAM    : 0x00020000
EXT RAM    : 0xC0000000 [3 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : Symphony
ProdName  : ZVII
ProdModel : ZVII
Device    : ZVII
AndroidVer: 6.0
MTKxCPU   : MT6735
MTKxPRJ   : P3557_DP35571_SYMPHONY-ZVII_L109

[Read Ok] : preloader_p3557.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6753 / V1.1.2 / p3557 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 3161 MiB
Scatter saved to : C:\Users\polash\Desktop\MT6735__Symphony__ZVII__ZVII__6.0__P3557_DP35571_SYMPHONY-ZVII_L109\

All done!

Done!
Elapsed: 00:08:40
Reconnect Power/Cable!



Tuesday, 4 September 2018

AXIOM-S500 MT6735 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom

AXIOM-S500 MT6735 FIRMWARE FLASH FILE ANDROID 5.1 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1j0qKIDtSLX18k97tBiW2gVy4G_VfaSlB

Wait for phone...
Phone found! [ 9 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065314738F20F0705C3410719
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e1G8
[eMMC] : FLASH_CID : 90014A483847316505070FF21907A2C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID    : 0xBA11EB18C443B9C5A168D07F8A35DD8A
INT RAM    : 0x00020000
EXT RAM    : 0x40000000 [1 GiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand     : AXIOM
ProdName  : S500
ProdModel : S500
Device    : bd6735m_35gc_c_l1
AndroidVer: 5.1
MTKxCPU   : MT6735
MTKxPRJ   : S500_Axiom_12112015_V2.0

[Read Ok] : preloader_bd6735m_35gc_c_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735M / V1.1.2 / bd6735m_35gc_c_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 1389 MiB
Scatter saved to : C:\Users\polash\Desktop\MT6735__AXIOM__S500__bd6735m_35gc_c_l1__5.1__S500_Axiom_12112015_V2.0\

All done!

Done!
Elapsed: 00:04:52
Reconnect Power/Cable!

SYMPHONY E82 HW1 V11 MT6570 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

SYMPHONY E82 HW1 V11 MT6570 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1I4pOjDEZn7aLDfBf839Lmgp4NLq7jMb0

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
     CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
     TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode  : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1812 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
     BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
     DA : AGENT started!
DA : SYNC
     DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

        SRAM: 0x00020000 [ 128.00 KB ]
        DRAM: 0x20000000 [ 512.00 MB ]

        NAND: 98DE88A37251080000000000
        NAND:
              TSIZE  : 0x217800000 [ 8.37 GB ]
              ASIZE  : 0x1F7400000 [ 7.86 GB ]
              PSIZE  : 0x00004000 [ 16.00 KB ]
              BSIZE  : 0x00600000 [ 6.00 MB ]
              SSIZE  : 0x000007A0
              STYPE  : 0x0013

        CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

        RNID : 260B6549771E7CC77434E8317D488E5D

DA : USB : HIGH-SPEED

Boot done!

Patch Level    : MRA58K
Display ID     : E82_HW1_V11
Ver. CodeName  : REL
Ver. Release   : 6.0
Sec. Patch     : 2017-07-05
Build Time     : 1501061741
Product Model  : E82
Product Brand  : Symphony
Product Name   : E82
Product Device : E82
Product Board  : E82
Product Manfct : Symphony
Board Platform : mt6570
Product Info   : fise6570_ctlc_m

MT6570__Symphony__E82__6.0__E82_HW1_V11__MRA58K__fise6570_ctlc_m

Read : preloader.bin
Read : nvram.bin
Read : lk.bin
Read : boot.img
Read : recovery.img
Read : secro.img
Read : logo.bin
Read : md1rom.img
Read : system.img
Read : userdata.img

FW Size  : 1.93 GB
Android Info saved : _Android_info.txt
Scatter  : MT6570_Android_scatter.txt
Saved to : C:\Users\polash\Desktop\MT6570__Symphony__E82__6.0__E82_HW1_V11__MRA58K__fise6570_ctlc_m\

Done!
Elapsed: 00:06:24


GPHONE G666 MT6572 FIRMWARE FLASH FILE ANDROID 6.1 100% TESTED BY Bijle Telecom

GPHONE G666 MT6572 FIRMWARE FLASH FILE ANDROID 6.1 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1Axb1gsrZ0q3QwHJDfZKSzWNk3Ri7but0

Reading Flash Content now ...

Brand     : alps
ProdName  : hexing72_cwet_kk
ProdModel : G666
Device    : hexing72_cwet_kk
AndroidVer: 6.1
MTKxCPU   : MT6572
MTKxPRJ   : R6372_HYZ_A37_Gphone_G666_2CAM_F_20170710_D_V06

[Read Ok] : preloader_hexing72_cwet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / hexing72_cwet_kk / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 589 MiB
Scatter saved to : C:\Users\Needrombd\Desktop\reading\MT6572__alps__G666__hexing72_cwet_kk__6.1__R6372_HYZ_A37_Gphone_G666_2CAM_F_20170710_D_V06\

All done!

Done!
Elapsed: 00:05:10
Reconnect Power/Cable!


HELLO PREMIUM8 MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

HELLO PREMIUM8 MT6580 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1goiLf7OtuUEc11_2trxs75Cvx00njdo-

INVENS E2 SP7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom

INVENS E2 SP7731 FIRMWARE FLASH FILE ANDROID 6.0 100% TESTED BY Bijle Telecom
polash_kar@ymail.com 01816493918
https://drive.google.com/open?id=1ZGxIeSw0BgrYdIlBA07yWrXuGsRjjojj

- > Wait phone connected ...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0    
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : E2
Model Brand : Eager
Model Device: E2
AndrVersion : 6.0
BaseBand CPU: SP7731CEB
Project Ver : AD198A_Eager_E2_MJL_A6_V01_TN_20180130
Model Ext   : E2

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W17.27.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1877 MiB
Saved to : C:\Users\polash\Desktop\SP7731CEB_E2_6.0_AD198A_Eager_E2_MJL_A6_V01_TN_20180130_E2\
Done!

Elapsed: 00:09:54

Reconnect Power/Cable!